1x32 fiber optic plc splitter

1x32 Fiber Optic PLC Splitter CATV WDM with IP in 1U 19 Inch Rack Mount Feature: Wide Wavelength Range Low Insertion Loss High Channel Isolation High stability and reliability Applications: System Monitoring Transmitters and Fiber Fiber optical amplifier Performance Specification: Parameter SPEC Pass Band Wavelength Range (nm) 1540~ 1560 Reflection Band1 Wavelength Range 1 (nm) 1260 ~ 1360 Reflection Band2 Wavelength Range 2 (nm) 1480~ 1500 Operating Temperature () -5 ~+75

FTTH Fiber Optical splitter 0.9mm Spliter PLC 1x4 1x8 1x16 1x32 PLC splitter Fiber Optic PLC Splitter Description: (Planar lightwave circuit) PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, It's widely used in PON,ODN,FTTX point to connect between termination device and central office to achieve the signal

1x32 SC/APC Single Mode Rackmount Type Fiber Optical PLC Splitter in Telecom 1*32 Rackmount Type PLC splitter description 1*32 Rack Mount PLC-Planar Lightwave Circuit Splitter have excellent optical properties, high stability and high reliability to meet the needs of a variety of applications. 1U frame mounting type adopts 1U frame, or customized according to actual requirements. It can be properly installed in the ODF and can be perfectly integrated with the box/ cabinet

1x32 Fiber Optic PLC Splitter SMF-28e fiber with 0.9mm Mini Steel Tube , SC/APC Fiber Optic PLC Splitter Description Takfly's high quality 1x32 Fiber Optic PLC Splitter SMF-28e fiber with 0.9mm Mini Steel Tube and SC/APC connector, it is widely used in FTTH/FTTX/GPON/EPON application. Except 0.9mm mini steel tube package, Takfly also offers 250m bare fiber mini steel tube, 2.0/3.0mm ABS Box, Termination Box and Rack Mount Packages for our Fiber Optic PLC Splitter. Unconnecto

1x32 Fiber Optic PLC Splitter SMF-28e fiber with 0.9mm Mini Steel Tube , SC/APC Fiber Optic PLC Splitter Description PLC splitter is an optical power distribution device based on the integrated waveguide of quartz plate. With the features of small size, wide range of operating wavelength, stable reliability and good uniformity, Its widely used in PON,ODN,FTTX point to connect between termination device and central office to achieve the signal splitter. Takfly's high quality

1*32 SC/APC Single Mode G657A1 LGX Cassette Type Fiber Optic PLC Splitter in Network 1*32 LGX Cassette type PLC splitter description 1X32 LGX type PLC has 1*32 steel type PLC with SC/APC connector. Plug and play. Outside is a plastic box, which protects the components inside from outside damage to maintain the normail transmission of light signals. Fiber optic splitters enable a signal on an optical fiber to be distributed among two or more fibers. Since splitters contain no

GR-1209 Low insertion Steel Tube FC/SC/ST/LC Connector Fiber Optical PLC Splitter Fiber Optic PLC Splitter Description: Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology.It features wide operating wavelength range,the distribution of wavelength range covers EPON technology used 1310nm,1490nm and 1550nm three wavelengths. Especially suitable for EPON Ethernet passive optical network access technology FTTP fiber network system

FTTH Optical PLC Splitter 1x32 Fiber Optic Splitter Mini Type Single Mode Steel Tube SC APC Splitter Fiber Optic PLC Splitter Description The PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical

1U Rack Mount Type 1x2 1x4 1x8 1x16 1x32 1x64 PLC Splitter with SC/APC Connector FTTH PLC Splitter - Introduction : PLC Splitter is based on planar Light wave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN .PLC Splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. SUNET's PLC Splitter offers superior optical