rj 45 optical transceiver module
"
1000BASE-T SFP Copper 100m RJ-45 CISCO JUNIPER HUAWEI COMPATIBLE SFP OPTICAL TRANSCEIVER MODULE
1000BASE-T SFP Copper 100m RJ-45 CISCO JUNIPER HUAWEI COMPATIBLE SFP OPTICAL TRANSCEIVER MODULE SFP-GE-T Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level
10GBASE-T SFP+ Copper Transceiver Compact RJ-45 connector assembly
Features Support 10 Gbase -T / 5 Gbase -T / 2.5 Gbase -T / 1000 base -T Hot-pluggable SFP footp rint Compact RJ-45 connector assembly RoHS compliant and lead-free Single +3.3 V power supply 10 Gigabit Ethernet over Cat 6 a cable Ambient Operating temperature : 0 C to +65C Description SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transcei vers are based on the SFP Multi Source Agreement ( MSA ). They are compatible with the 10 Gbase -T / 5 Gbase -T / 2.5 Gbase -T / 1 000
10/100BASE-T Copper SFP Transceiver Supporting SFP-Based Switch100Base-FX Ports with APC Polishing Type
Features Hot-pluggable SFP footp rint Fully metallic enclosure for low EMI Compact RJ-45 connector assembly It supports RX_LOS(Loss o f Signal) function Compatible with IEEE 802.3u Access to physical layer IC via 2-wire se rial bus A 10/ 100 BASE - TX / 100 BASE - FX converter Operating case temperature range of -40 C to +85C ( Industrial ) Applications This 100Base-TX Copper SFP Transceiver supports the SFP based switch100Base-FX ports that accept standard 100 Base - FX
1000BASE-T Copper SFP Transceiver TX Disable and RX Los/without Los function
Features Up to 1.25 Gb / s bi - directional data links Hot-pluggable SFP footp rint TX Disable and RX Los/without Los func tion Fully metallic enclosure for low EMI Low power dissipation ( 1.05 W typical ) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire se rial bus 10/ 100/ 1000 Mbps compliant in host systms with SGMII interface Operating case temperature range of 0 C to +70C ( Commercial ) -20 C to +85C ( Extend ) Applications 1.25 Gigabit
1000BASE-T Copper SFP Transceiver Fast and Stable Data Transmission for ODF Wiring Devices
Features Up to 1.25 Gb / s bi - directional data links Hot-pluggable SFP footp rint TX Disable and RX Los/without Los func tion Fully metallic enclosure for low EMI Low power dissipation ( 1.05 W typical ) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire se rial bus 1000 BASE-T operation in host systems SERDES interface Operating case temperature range of 0C to +70C (Commercial) -20C to +85C (Extend) Applications 1.25 Gigabit Ethernet over Cat 5
FC-APC Fiber Optic Patch Cord 9/125um Single-Mode 1000N Tensile
FC-APC Fiber Optic Patch Core Connector These high-speed singlemode 9/125um duplex fiber optic patch cables feature LC/APC connectors on one end and SC/APC connectors on the other (LC/APC-SC/APC). LC connectors (Lucent Connectors) are ideal for high-density connections and compatible with plug-and-play devices like SFP modules and XFP transceivers. SC connectors (Subscriber Connectors) are widely used in FTTH (fiber to the home) applications, Datacom, Telcom, and most GBIC
10Gbps Copper SFP+ RJ45 CAT6 30m Sfp 10g Base T Compatible CISCO
Compatible CISCO 10Gbps Copper SFP+ RJ45 CAT6 30m 10G Base Optical SFP Transceiver SFP Module Description SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset. Features Support 10Gbase-T /
